Description
HP & Torque: 375 HP / 400 FT LBS
Compression Ratio: 10.0:1
Aluminum Heads
Hypereutectic Pistons
Flat Tappet Cam
Cast Steel Crank
Part #: BP35512CT1
Block:
4-bolt main, 1-piece rear main seal
Passenger side dipstick
Align honed main bearing bore
Cylinders honed on computer controlled machine to within .0002 straightness and roundness
Cylinders are sonic tested for thickness
Rotating Assembly:
BluePrint premium cast steel crankshaft
Hypereutectic pistons
Chevy heavy beam rods with 150,000 PSI bolts
Hastings moly rings
Melling high volume oil pump
Hydraulic flat tappet cam
Heavy duty double roller timing set
Cylinder Heads:
BluePrint Performance Aluminum
Hardened retainers and springs
2.02 swirl polished intake valves
1.60 swirl polished exhaust valves
BP Aluminum Head Part# H8002K
For complete head specs, click here
Cam Specs:
Cam Type: Flat Tappet
.480 Intake .486 Exhaust
229 Intake / 230 Exhaust duration
@ .050
Ignition Timing:
34 Degrees total at 3500 rpm
Also Includes:
New valve covers
Oil pan
Timing cover
Brass freeze plugs
Dyno test results shipped with engine
Warranty:
30 month / 50,000 mile
Notes:
Picture shown with optional tall, perimeter bolt valve covers.
This engine requires a non weighted harmonic balancer, and a late 350 (for 1 piece rear seal) weighted flexplate/flywheel.
If you are using an automatic transmission, BluePrint Engines recommends a 2000-2400 rpm stall converter.
Recommended spark plugs are Champion 792 with .045″ gap
Not for use in pollution controlled vehicles.
This engine is not compatible with factory fuel injection.
