HP & Torque: 310 HP / 360 FT LBS
Compression Ratio: 9.5:1
Cast Iron Heads
Flat Tappet Cam
Cast Steel Crank
Part #: BP35511CT1
4-bolt main, 1-piece rear main seal
Passenger side dipstick
Align honed main bearing bore
Cylinders honed on computer controlled machine to within .0002 straightness and roundness
Cylinders are sonic tested for thickness
BluePrint premium cast iron crankshaft
Chevy heavy beam rods with 150,000 PSI bolts
Hastings moly rings
Melling high volume oil pump
Hydraulic flat tappet cam
Heavy duty double roller timing set
BluePrint premium center bolt cast iron
Hardened retainers and springs
2.02 swirl polished intake valves
1.60 swirl polished exhaust valves
Cam Type: Flat Tappet
.480 Intake .486 Exhaust
229 Intake / 230 Exhaust duration
110 degree lobe sep.
34 degrees at 3500 RPM
New valve covers, oil pan and timing cover
Brass freeze plugs
Dyno test results shipped with engine
30 month / 50,000 mile
This engine requires a non weighted harmonic balancer, and late 350ci weighted flexplate/flywheel.
If you are using an automatic transmission, BluePrint Engines recommends a 1800-2200 rpm stall converter.
Not for use in pollution controlled vehicles.
This engine is not compatible with factory fuel injection.
MUST USE 1987-1995 INTAKE MANIFOLD BOLT PATTERN