Description
- Horsepower & Torque: 390 Horsepower / 410 FT. LBS. Torque
- Compression Ratio: 9.2:1
- Aluminum Heads
- Hydraulic Roller Cam
- Cast Crankshaft
- Hypereutectic Pistons
Block:
- BluePrint Engines High Strength Cast Iron Block
- Manufactured and Machined in the USA!
- 4-Bolt Main
- 4.000″ Bore
- 1-Piece Rear Main Seal
- Mech Fuel Pump Provision: Yes
- Passenger Side Dipstick
- Drilled and Tapped for Clutch Linkage
Rotating Assembly:
- Cast Crankshaft
- 3.480″ Stroke
- Forged 5.700″ Connecting Rods
- Hypereutectic Pistons
- Internally Balanced Front – Externally Balanced Rear
Cylinder Heads:
- BluePrint Aluminum Cylinder Heads – H8002K
- 64cc Chamber
- 2.02″ Intake / 1.60″ Exhaust Valves
- 195cc Intake / 75cc Exhaust Runners
Cam Specs:
- Cam Type: Roller
- .495 Intake /.502 Exhaust Lift
- 220 Intake / 224 Exhaust Duration
- @.050-114 Degree Lobe Separation
Ignition Timing:
- 32 Degrees Total at 3500 RPM
Also Includes:
- Rear Sump Oil Pan
- Timing Cover
- Valve Covers
- Dipstick
Recommended Break in Oil: BPP710 (Click Here)
Recommended Service Oil: BPP10W30 (Click Here)
Recommended Oil Filter: BPP51061 (Click Here)
Notes:
- The performance aluminum cylinder heads on this engine feature a .500 raised port vs OEM.
Part Number: BP3505CT
Fuel Delivery Type: (Not included) Recommend 670cfm Carburetor BPP67265
Spark Plug: BPP7938 NGK 7938 BKR5E (.750 inch reach, 14mm thread, 5/8 hex, plug)
Spark Plug Gap: .035″
Harmonic Balancer: (Not included) Recommend BPP350 – Non-Weighted, 8″ Diameter
Intake Manifold: Dual Plane, Satin Aluminum BPP350VINT
Fuel Recommendation: 91 Octane
Timing (Initial/Total Advance): Initial Timing 10-16° and Total Timing 32°
Firing Order: 1,8,4,3,6,5,7,2
Recommended Break in Oil: BPP710 (Click Here)
Recommended Service Oil: BPP10W30 (Click Here)
Recommended Oil Filter: BPP51061 (Click Here)
Total Oil Capacity with Production Oil Pan, and Correct: BPP51061 Filter – 5 Quarts
Header Partners:
Click here for our Header Partners and recommendations.
