1967-69 F-Body Camaro/Firebird Pro-Touring 6-speed kit

Pro-Touring Kit for 1967-69 F-Body Camaro/Firebird

Request A Quote

-

If you don't know what you need, call our technical sales staff at 931-646-4836

Description

American Powertrain Pro-Touring Magnum 6-speed kit for First Gen Camaro, Firebird and Trans Am F-body for factory 4-speed cars

The Ultimate Overdrive for 1st Gen Camaro!

  • 30-50% increase in fuel economy
  • Low RPM cruising for greatly reduced driver fatigue and an improved highway driving experience. 
  • Reduced engine wear leading to longer engine life
  • Cooler engine operating temperatures
  • Reduced NVH (noise – vibration – harshness)

Tremec T56 Magnum Gear Ratios

Close Ratio 2.66, 1.78, 1.30, 1.00, 0.80, 0.63
Wide Ratio 2.97, 2.10, 1.46, 1.00, 0.74, 0.50

Kit includes: Pro-Touring upgrades 

  • White Lightning Shifter upgrade standard for Pro-Touring Kit- Original 4-speed shift position
  • Seamless DOM Aluminum driveshaft Assembly – Race Balanced, Solid U-Joints
  • Driveshaft Slip Yoke – Cryogenically hardened steel
  • X-Factor Cross Member for low ground clearance. 
  • Transmission Mount – Polyurethane
  • Pilot Bearing – Stainless rollers, grease pre-pak
  • Reverse Light Harness – Weatherseal
  • Speedometer Conversion – Mechanical or Electronic
  • Shifter Knob
  • Round Stock Chrome Shifter Handle
  • Console Shift Pattern Plate
  • Modular Reverse Lock-out Harness
  • Modular Reverse Light Harness
  • Hardware, Instructions, Warranty
  • Transmission sold separately
  • NOTE: Kit does not normally require modifications to the car, unless you have raised the engine center line or use shorter than stock subframe mounts. 6-speeds are very tight on these cars.

Optional Parts:

  • Hydramax Hydraulic Clutch
  • Bell housing
  • Flywheel
  • Shifter

 

Get your Pro-Touring project sorted out with our new F-Body Pro-Touring Kit. Perfect for auto-cross, race race and the drive home!

 

Pro-Touring Kit Install Video|

Weight: 43.0000 lbs

Dimensions: W8.0000" x H32.0000" x L8.0000"

If you don't know what you need, call our technical sales staff at 931-646-4836