Description
Blueprints BP327CTFKV GM Small Block Compatible performance crate engines are dyno tested at our factory with a Holley Sniper II EFI System. This produces 350 horsepower and 350 ft. lbs. torque. This engine comes as a deluxe dressed engine that comes with: Premium Vintage Valve Covers, Premium Vintage Air Cleaner as well as the Fuel Pump and Feed lines. Makes this engine a great drop in for performance. Comes with a Polished Pulley Kit.
Description:
- Horsepower & Torque: 350 Horsepower / 350 ft. lbs. Torque
- Compression Ratio: 9.4:1
- BluePrint Engines Aluminum Heads
- BluePrint Engines Hydraulic Roller Cam
- BluePrint Engines Forged Crank
- Hypereutectic Pistons
Block:
- BluePrint Engines High Strength Cast Iron Block
- Drilled and Tapped for Clutch Linkage
- Mech Fuel Pump Provision: Yes
- Passenger Side Dipstick
- 1-Piece Rear Main Seal
- 4-Bolt Main
- 4.000″ Bore
Rotating Assembly:
- BluePrint Forged Crankshaft
- 3.250″ Stroke
- Forged 5.700″ Connecting Rods w/ 150,000 PSI Bolts
- Hypereutectic Pistons
- Internally Balanced Front – External Balanced Rear
Cylinder Heads:
- BluePrint Aluminum Cylinder Heads – H8002K
- 64cc Chamber
- 2.02″ Intake / 1.60″ Exhaust Valves
- 195cc Intake / 75cc Exhaust Runners
Cam Specs:
- Hydraulic Roller
- .495 Intake / .502 Exhaust Lift
- 220 Intake / 224 Exhaust Duration
- @ .050-114 Degree Lobe Separation
Ignition Timing:
- 32-34 Degrees Total at 3500 RPM
Also Includes:
- Polished Front Accessory Drive with Water Pump, A/C Compressor, Alternator, and Power Steering Pump
- Holley Sniper 2 EFI System – BPP550-510-3XX
- Aluminum Intake Manifold – BPP350VINT
- Pro Billet Distributor – BPP3503TDBK
- Thermostat Housing – BPP10108470
- Premium Vintage Valve Covers
- Premium Vintage Air Cleaner
- 6.75-inch Harmonic Balancer
- Thermostat – BPP180TS
- Timing Cover
- Spark Plugs
- Oil Pan
- Under Header Spark Plug Wires (Perfect for Rams Horn exhaust manifolds)
Notes:
- Not for use in pollution-controlled vehicles.
- The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment. Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles.
Part Number: BP327CTFKV
Fuel Delivery Type: Fuel Injection
Spark Plug: BPP7938 NGK 7938 BKR5E (.750-inch reach, 14mm thread, 5/8 hex, plug)
Spark Plug Gap: .035″
Harmonic Balancer: BPP350 – Non-Weighted, 8″ Diameter
Flexplate/Flywheel: Late 350 Weighted
Stall Converter: 1800 – 2200 rpm
Intake Manifold: Dual Plane, Satin Aluminum
Fuel Recommendation: 91 Octane
Timing (Initial/Total Advance): Initial Timing 10-16° and Total Timing 32-34°
Firing Order: 1,8,4,3,6,5,7,2
Recommended Break in Oil: BPP710 (Click Here)
Recommended Service Oil: BPP10W30 (Click Here)
Recommended Oil Filter: BPP51061 (Click Here)
Total Oil Capacity with Production Oil Pan, and Filter: 5 Quarts
Click here to download a copy of the Installation Guide that came with your BluePrint engine.
Header Partners:
Click here for our Header Partners and recommendations.
