Description
- Horsepower & Torque: 341 Horsepower / 371 FT. LBS. Torque
- Compression Ratio: 9.2:1
- Aluminum Heads
- Hydraulic Roller Cam
- Cast Crankshaft
- Hypereutectic Pistons
Block:
- BluePrint Engines High Strength Cast Iron Block
- Manufactured and Machined in the USA!
- 4-Bolt Main
- 4.000″ Bore
- 1-Piece Rear Main Seal
- Mech Fuel Pump Provision: Yes
- Passenger Side Dipstick
- Drilled and Tapped for Clutch Linkage
Rotating Assembly:
- Cast Crankshaft
- 3.480″ Stroke
- Forged 5.700″ Connecting Rods
- Hypereutectic Pistons
- Internally Balanced Front – Externally Balanced Rear
Cylinder Heads:
- BluePrint Aluminum Cylinder Heads – H8002K
- 64cc Chamber
- 2.02″ Intake / 1.60″ Exhaust Valves
- 195cc Intake / 75cc Exhaust Runners
Camshaft: Hydraulic Roller Cam – .477 Intake / .471 Exhaust Lift and 202 Intake / 212 Exhaust Duration @.050-115° LSA
Ignition Timing:
- 32 Degrees Total at 3500 RPM
Also Includes:
- Holley Brawler 670cfm Vacuum Secondary Carburetor w/ Electric Choke
- Black Front Accessory Drive with Water Pump, A/C Compressor, Alternator, and Power Steering Pump
- Thermostat and Thermostat Housing
- Valve Covers
- Rear Sump Oil Pan
- Timing Cover
- Aluminum Intake
- HEI Distributor
- Spark Plugs and Wires
- Mechanical Fuel Pump – BPP61073
Recommended Break in Oil: BPP710 (Click Here)
Recommended Service Oil: BPP10W30 (Click Here)
Recommended Oil Filter: BPP51061 (Click Here)
Notes:
- The performance aluminum cylinder heads on this engine feature a .500 raised port vs OEM.
Part Number: BP350CTC
Fuel Delivery Type: 670cfm Carburetor BPP67265
Spark Plug: BPP7938 NGK 7938 BKR5E (.750 inch reach, 14mm thread, 5/8 hex, plug)
Spark Plug Gap: .035″
Harmonic Balancer: (Not included) Recommend BPP350 – Non-Weighted, 8″ Diameter
Intake Manifold: Dual Plane, Satin Aluminum BPP350VINT
Fuel Recommendation: 91 Octane
Timing (Initial/Total Advance): Initial Timing 10-16° and Total Timing 32°
Firing Order: 1,8,4,3,6,5,7,2
Recommended Break in Oil: BPP710 (Click Here)
Recommended Service Oil: BPP10W30 (Click Here)
Recommended Oil Filter: BPP51061 (Click Here)
Total Oil Capacity with Production Oil Pan, and Correct: BPP51061 Filter – 5 Quarts
Header Partners:
Click here for our Header Partners and recommendations.
