Description
- Horsepower & Torque: 415 Horsepower / 415 FT. LBS. Torque
- Compression Ratio: 10.0:1
- Aluminum Heads
- Cast Crankshaft
- Hydraulic Roller Cam
Block:
- BluePrint Engines High Strength Cast Iron Block
- Increased Deck Thickness and Strength Webbing
- Priority Main Oiling
- 4.000″ Bore
- 4-Bolt Main
- 1-Piece Rear Main Seal
- Improved Water Jacket Design
Rotating Assembly:
- Cast Crankshaft
- 3.400″ Stroke
- Forged 5.400″ Connecting Rods
- Forged Pistons
- 28oz Externally Balanced Front and Rear
Cylinder Heads:
- BluePrint Aluminum Cylinder Heads – HP9009
- 60cc Chamber
- 2.02″ Intake / 1.60″ Exhaust Valves
- 190cc Intake / 60cc Exhaust Runners
Cam Specs:
- Hydraulic Roller Cam
- .543 Intake / .554 Exhaust Lift
- 218 Intake / 226 Exhaust Duration
- @.050-112 Degree Lobe Separation
Ignition Timing:
- 10-16 Degrees Initial, 32-34 Total
Also Includes:
- Holley Brawler 670cfm Vacuum Secondary Carburetor w/ Electric Choke
- Front Accessory Drive with Water Pump, A/C Compressor, Alternator, and Power Steering Pump
- Front Sump Oil Pan
- Thermostat and Thermostat Housing
- Valve Covers
- Harmonic Balancer
- Spark Plugs and Wires
- Timing Cover
- Aluminum Intake
- Water Neck
- Distributor
Notes:
- Engine timing cover is designed for standard rotation water pump and pulley kit ONLY.
- The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment. Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles.
Part Number: BP3479CTCK
Fuel Delivery Type: Carbureted, 670cfm
Spark Plug: BPP7938 NGK 7938 BKR5E (.750 inch reach, 14mm thread, 5/8 hex, plug)
Spark Plug Gap: .035″
Harmonic Balancer: BPP28 – 28 Ounce, 6.4″ Diameter
Flex plate/Flywheel: 28 Ounce Weighted such as BPP529618, BPPF28164, BPPF157T28
Stall Converter: 2000-2400 rm
Intake Manifold: Dual plane
Fuel Recommendation: 91 Octane
Timing (Initial/Total Advance): Initial timing – 10-16° and Total timing 32-34°
Firing Order: 1,3,7,2,6,5,4,8
Notes: Not for EGR – Engine requires a V-belt standard rotation water pump and belt system.
Recommended Break in Oil: BPP710 (Click Here)
Recommended Service Oil: BPP10W30 (Click Here)
Recommended Oil Filter: BPP21085 or BPP51515 (Click Here)
Total Oil capacity with production oil pan, and Correct Filter: 5 Quarts
Header Partners:
Click here for our Header Partners and recommendations.
Click here to download a copy of the Installation Guide that came with your BluePrint engine.
