TREMEC Magnum 6-Speed Pro Fit Kit 1999-06 Chevrolet GMC GMT800 Trucks

 

ProFit MAGNUM Installation Kit for 1999-06 Chevy NBS/GMT800 Trucks

Standard Kit includes:

TREMEC Magnum 6-Speed Double Overdrive with 700 ft/lbs of torque capacity and 8000 rpm shifting!

White Lightning Mid-Shift  – Original shift position
Driveshaft Slip Yoke – Cryogenically hardened steel
Transmission Mount – Polyurethane

Bolt in Adjustable Crossmember 

All in One Wiring Harness
White Shifter Knob
Hardware, Instructions, Warranty

Requires 6-speed bell housing. See options below

If you do not know what parts you need click here to get a quick quote or call our sales dept at 931-646-4836

Optional Parts:

  • Hydramax Hydraulic Clutch
  • Bell housing
  • Flywheel
  • Shifter Handle

$4,900.00

In Stock

-

1999-04 / 2008-14 Chevrolet/GMC Silverado/Sierra GMT800 Hydraulic Clutch Pedal Kit

1999-04 / 2008-14 Chevrolet/GMC Silverado/Sierra GMT800 Hydramax 6-Speed Kit for Tremec Magnum

Bell Housing for LS T56 or LS Magnum

Aluminum bell for LS T56 or LS Magnum

Lokar Single Bend 16" Shifter Lever Black Fits TREMEC TKO & Magnum

If you don't know what you need, call our technical sales staff at 931-646-4836

Description

American Powertrain Pro-Fit Magnum 6-speed kit for 1999-2006 GMC/ Chevy Trucks

  • 30-50% increase in fuel economy
  • Low RPM cruising for greatly reduced driver fatigue and an improved highway driving experience. 
  • Reduced engine wear leading to longer engine life
  • Cooler engine operating temperatures
  • Reduced NVH (noise – vibration – harshness)

Tremec T56 Magnum Gear Ratios

Close Ratio 2.66, 1.78, 1.30, 1.00, 0.80, 0.63
Wide Ratio 2.97, 2.10, 1.46, 1.00, 0.74, 0.50

 

26-spline clutch disk required

If you do not know what parts you need click here to get a quick quote or call our sales dept at 931-646-4836

Kit includes:

  • White Lightning Mid-Shift Mechanism 
  • Driveshaft Slip Yoke – Cryogenically hardened steel (new driveshaft required)
  • Bolt in adjustable X-Factor Crossmember
  • Transmission Mount – Polyurethane
  • Pilot Bearing
  • Bowler All In One Harness for adjusting speedometer output and reverse lock out
  • Shifter Knob
  • Hardware, Instructions, Warranty

Optional Parts:

  • Hydramax Hydraulic Clutch
  • Clutch Pedal
  • Pilot Bearing
  • Bell housing
  • Flywheel
  • Shifter Handle

NOTE: If you are doing a Automatic to Manual conversion you will need some ECU tuning to keep the engine out of limp mode. We recommend using the HP Tuners software or find a reputable shop to help with the tune. Its quick to have done.

Weight: 150 lbs

Dimensions: W14" x H18" x L48"

If you don't know what you need, call our technical sales staff at 931-646-4836