1966-70 Mopar B-body TKX 5-speed kit

SKU: COCH-B1 Category:

1966-70 Mopar B-body 5-speed conversion kit 

You will need a new Mopar Bell for either small block Mopar or Big Block Mopar with Ford TKX bolt pattern. Select in the options below.

Optional Parts:

  • Hydramax Hydraulic Clutch
  • Pilot Bearing
  • Bell housing (required for install if you do not have one)
  • Flywheel
  • Shifter
  • Shifter Handle

Select your gear ratio: Please read the description below on kit contents.

$4,485.95

-

Mopar Big Block Aluminum Bell Housing Ford TKO/TKX

Mopar Big Block to Ford TKO bell housing

Out of stock

Lakewood Mopar Small Block and GEN III Hemi Aluminum Bell Housing Ford TKO/TKX

Mopar Small Block/GEN III Hemi to Ford TKO/TKX bell housing

1966-70 Mopar B-Body (Charger, Road Runner, GTX, Coronet) Underdash Hydraulic Clutch Kit for Tremec TKX and TKO

If you don't know what you need, call our technical sales staff at 931-646-4836

Description

American Powertrain Pro-Fit TREMEC TKX kit for 1966-70 Mopar B-body 

  • 30-50% increase in fuel economy
  • Low RPM cruising for greatly reduced driver fatigue and an improved highway driving experience. 
  • Reduced engine wear leading to longer engine life
  • Cooler engine operating temperatures
  • Reduced NVH (noise – vibration – harshness)

TKX Gear Ratios

Select between 3 ratios 

Our best seller is 17765 with the .68 OD works great with 3.55-4.11 gears 

Wide Ratio – 3.27, 1.98, 1.34, 1.00, 0.72
Close Ratio – 2.87, 1.89, 1.28, 1.00, 0.68 OR 0.81 5th

1966-70 Mopar B-body

Kit Includes:

Pro-Fit Modified TKX
ProShift3 Shifter Mechanism for B-body – Provides OE 4-speed shift position
Driveshaft Slip Yoke (shorter driveshaft required)
Bolt-In Cross Member – Black powder coat, uses original bolt holes and braces torsion bar support
Isolator Mount – Polyurethane
Speedometer Solution – Mechanical or Electronic
Conversion Pilot Bearing – Works in manual and automatic cranks
Conversion Release Bearing – Compatible with OE clutch fork,
Weatherseal Reverse Light Harness,
Tunnel Patch and Template
Hardware, Complete Instructions and Warranty

You will need a new Mopar Bell for either small block Mopar or Big Block Mopar with Ford TKX bolt pattern.

26-spline clutch disk required

Optional Parts:

  • Hydramax Hydraulic Clutch
  • Pilot Bearing
  • Bell housing (required for install if you do not have one). 
  • Flywheel
  • Shifter
  • Shifter Handle

Weight: 100 lbs

Dimensions: W14" x H18" x L31"

You may also like…

  • White Lightning Shifter for Tremec TKX 5-Speed

    $329.00$339.00

    -

If you don't know what you need, call our technical sales staff at 931-646-4836