FedEx
Showing 253–336 of 685 resultsSorted by popularity
-
Tremec GM MAGNUM XL 6-Speed 2.66 First Gear .63 Overdrive TUET18131
$3,695.00-
-
1960-65 Ford Falcon/Comet Underdash Hydraulics Clutch Pedal Kit
$735.00-
-
1964-67 A-Body Chevelle/GTO Convertible/ El Camino or boxed frame to 700r4 Cross Member
$380.00-
-
1987-94 Chevrolet/GM 1500 “OBS” Hydraulic Clutch Conversion Kit with Clutch Pedal for Tremec TKX and TKO 5-Speed
$1,050.00-
-
Centerforce DFX DISC GM 1-1/8″ 26-spline 11″ Diameter GM
$249.95-
-
Centerforce I and II Clutch Disc, Organic, 1-1/8 in. Diameter Shaft, 26-Spline, 10 in. Diameter Ford
$209.95-
-
Centerforce Dual Friction Clutch Friction Disc 11″ Diameter 10-spline 1-1/16″ input Ford
$229.95-
-
Lokar Black Stainless 5″ Round Shifter Boot Ring
$36.95-
-
Clayton Machine Works 8″ Shift Lever Single Bend Truss Style Anodized Black TREMEC TKX & MAGNUM
$184.95-
-
Centerforce DYAD 10.4″ Big Block Mopar Clutch and 130-tooth Flywheel Kit-8 bolt crank 26-spline
$1,729.95-
-
1967-70 Mustang Hydramax Hydraulic Clutch System with 429/460 FE Engines and Magnum 6-speed
$754.73-
-
Tremec MAGNUM XL 6-Speed Kit 2005-2018 Mustang Wide Ratio TUKT12021
$4,295.00-
-
67-68 Camaro/Firebird Brake and Clutch Pedal Assembly
$135.45-
-
ProFit TKX 5-Speed Kit for 1968-74 Gen 2 X-body (Nova, Ventura)
$4,190.95-
-
SCIENCE FRICTION Billet Steel 168t Flywheel, 2-piece main seal 454/496
$325.95-
-
SCIENCE FRICTION Billet Steel Flywheel, SFI Quality, 143t/11″, All Big Block
$315.95-
-
SCIENCE FRICTION Billet Steel Flywheel for all Buick 401 Nailhead
$319.95-
-
Bell Housing for Buick/Olds/Pontiac, Compatible with OE Mechanical Linkage or Hydraulics Trans: Muncie, Richmond, Saginaw, BW T-10, GM TKX, TKO 500-600 & Jerico 4-5 Speed
$1,099.95-
-
SCIENCE FRICTION 164t Billet Steel Flywheel, 289/302/5.0, 347, 351C/W, 164t, 11″ clutch, Original Bell Housing, Neutral Balance
$315.95-
-
SCIENCE FRICTION Billet Steel 168t Flywheel, LSX 8 bolt crank engine to convert traditional 11″ clutch or OE Clutch
$299.95-
-
SCIENCE FRICTION Billet Steel 168t Flywheel, 1-piece main seal 91-up 454, 11″ clutch, for ZZ Crate Engine use FWCV-10006
$299.95-
-
SCIENCE FRICTION Billet Steel Flywheel, SFI Quality, 130t/10.5″, 1972-73 Cast Crank 340 w/CB, 6-bolt
$299.95-
-
Bell Housing for Ford 4.6/5.0/5.4 Mod Motor to Richmond/Jericho/Muncie
$1,149.95-
-
Bellhousing for Ford 4.6/5.0/5.4/5.8/6.2L Motor to Ford TKO/T5/TKX
$1,099.95-
-
Bell Housing for Ford 289/302/5.0/351 C/W to Toploader or Ford T-10
$1,149.95-
-
Bell Housing for Ford 289/302/5.0/351 C/W to Viper T56 Transmission
$1,015.95-
-
SCIENCE FRICTION Billet Aluminum Flywheel, AMC V8 with 4.5″ crank hub
$505.00-
-
Bell Housing for Ford Mod Motor to Ford Magnum T56
$1,099.95-
-
Ford Small Block Starter Cover
$108.32-
-
Chrysler 318s and 360s with TKX/TKO or T5 transmissions – SFI 6.1 Certified
$1,049.95-
-
Bellhousing Dial Indicator Plate for the Tremec T-56 Magnum 6-Speed Transmission
$110.00-
-
1960-66 Chevy C10 Truck TKX 5-Speed Kit
$4,250.95-
-
1966-70 Mopar B-body TKX 5-speed kit
$4,485.95-
-
1956-62 Chevrolet Corvette C1 TKX 5-Speed Kit
$4,295.95-
-
1968-74 Chevy Nova Hydraulic Clutch Conversion Kit with Malwood Underdash Hydraulic Clutch Pedal for GM TREMEC 6-Speed Magnum T-56
$1,085.95-
-
1968-74 Chevrolet Nova Malwood Underdash Hydraulics Clutch Pedal
$699.95-
-
1965-73 Mustang/Cougar TREMEC TKX 5-Speed kit
$3,995.95-
-
Wilwood Forged DynaPro 6 Big Brake Front Brake Kits 140-12947
$1,519.64-
-
Wilwood Classic Series Dynalite Front Brake Kits 140-15272
Price range: $814.19 through $918.14-
-
GM Mount to Transmission Bolts, TKX, Magnum
$5.69-
-
1968-72 Ford F-100 Wilwood Classic Series Front Brake Kit 140-14614
$991.09-
-
Wilwood Classic Series Dynalite Front Brake Kit 140-13476
Price range: $951.69 through $1,055.64-
-
1967-69 Chevrolet Camaro Pontiac Firebird Trans Am Hydraulic Clutch Conversion Kit with Malwood Clutch Pedal for TKX, TKO and Muncie Automatic to manual only
$1,110.00-
-
1960-64 Ford Galaxy Underdash Hydraulics Clutch Pedal Kit
$699.95-
-
1966-67 Ford Fairlane Underdash Hydraulics Clutch Pedal Kit
$699.95-
-
1970-74 Mopar E-Body (Challenger, Cuda) Underdash Hydraulic Clutch Kit with Malwood Clutch Pedal
$799.95-
-
Wilwood Forged DynaPro 6 Big Brake Front Brake Kits 140-10738
$1,433.01-
-
ProTwin Dual Disc Clutch Kit Ford 4.6L and Coyote 5.0L Engine and Godzilla (zero balance) 164 tooth steel flywheel 26-spline, 400-1000 ft/lbs
$975.00-
-
ProTwin Dual Disc Clutch Kit for LS Engines 8-bolt flywheel 26-spline 400-1100 ft/lbs
$975.00-
-
1969-70 Ford Mustang with power brake Hydraulic Clutch Conversion Kit with Underdash Hydraulics Clutch Pedal for TKX, TKO, T-5 and Magnum 6-Speed, T-56
$1,195.95-
-
1969-70 Mustang with power brake Underdash Hydraulics Clutch Pedal Kit
$699.95-
-
1969-70 Ford Mustang with manual brake Hydraulic Clutch Conversion Kit with Underdash Hydraulics Clutch Pedal for TKX, TKO, T-5 and Magnum 6-Speed, T-56
$1,195.95-
-
1969-70 Mustang with manual brake Underdash Hydraulics Clutch Pedal Kit
$625.00-
-
1968-71 Ford Fairlane / Gran Torino Underdash Hydraulics Clutch Pedal Kit
$699.95-
-
Gearstar GM 4L80E Automatic Transmission Level 5 1000hp for LS Engines
$8,295.00-
-
1969-70 Chevy Impala Hydraulic Clutch Conversion Kit with Clutch Pedal for Tremec 6-speed, Magnum and T-56. For factory auto pedal cars.
$1,200.00-
-
1971-74 Mopar B-Body (Charger, Road Runner, GTX, Coronet) Underdash Hydraulic Clutch Kit for Tremec 6-Speed Magnum and T-56
$1,200.00-
-
1966-70 Mopar B-Body (Charger, Road Runner, GTX, Coronet) Underdash Hydraulic Clutch Kit for Tremec TKX and TKO
$1,155.95-
-
1968-80 C3 Corvette Crossmember Tremec T56 Magnum
$415.00-
-
1968-81 C3 Corvette Crossmember Tremec TKO TKX, 700R4, 4L60
$415.00-
-
1982-2005 S10 Blazer Jimmy Crossmember Tremec T-56 and Magnum
$390.00-
-
1966-67 Chevy II/Nova Underdash Hydraulics Clutch Pedal
$725.00-
-
Centerforce I Clutch Pressure Plate 10.5″ diameter GM standard load 530 ft/lbs rated
$349.95-
-
Centerforce DYAD 10.4″ GM LSX Engines 8-bolt crank 1-1/8″ input shaft 26-spline 500-1300hp
$1,729.95-
-
Centerforce Dual Friction Clutch Friction Disc 11″ Diameter 10-spline 1-3/8″ input Ford
$199.95-
-
Centerforce Dual Friction Clutch Friction Disc 10.5″ Diameter 10-spline 1-1/16″ input Ford
$199.95-
-
Centerforce II Ford 11″ High Clamp Load Pressure Plate
$369.95-
-
Centerforce I Clutch Pressure Plate 11″ diameter Ford standard load low flex
$279.95-
-
Centerforce DYAD XDS Extreme Drive System 10.4″ Twin Disc Clutch and Flywheel Kit – 26 Spline (1996-2004 Mustang GT / Cobra / Mach-1 / 2007-2009 Shelby GT500)
$1,729.95-
-
Centerforce DYAD DS 10.4″ Clutch and Flywheel Kit 1963-1979 5.0L (302) “0” balance 1-1/8″ 26-spline input shaft
$1,729.95-
-
Centerforce I and II Clutch Disc, Organic, 1 1/16 in. Diameter Shaft, 10-Spline, 10.5 in. Diameter Disc, Ford, 4.6L
$169.95-
-
Clayton Machine Works 10″ Shift Lever Single Bend with Mesh Screen Insert Anodized Black TREMEC TKO & MAGNUM
$241.95-
-
Centerforce DYAD 10.4″ GM Small Block and Big Block 168-tooth flywheel 26-spline 2-piece rear main “0” balance
$1,729.95-
-
Centerforce DYAD 10.4″ GM Small Block and Big Block 153-tooth flywheel 26-spline 2-piece rear main “0” balance
$1,729.95-
-
1971-73 Mustang Hydramax Hydraulic Clutch System with 429/460 FE Engines and Magnum 6-speed
$799.00-
-
Tremec Ford MAGNUM XL 6-Speed 2.66 First Gear .50 Overdrive TUET11430
$3,695.00-
-
Tremec MAGNUM XL 6-Speed Kit for 2005-2018 Mustang 2.66 First Gear .63 Overdrive TUTK16901
$4,095.00-
-
Pilot Bearing for Mopar 18-spline 833 1.00″ OD / .78″ ID
$19.00-
-
Tremec MAGNUM XL 6-Speed Kit for 2005-2018 Mustang V8 Close Ratio TUKT12019
$4,295.00-
-
Ford Tremec MAGNUM XL 6-Speed 2.97 First Gear .63 Overdrive TUET11940
$3,695.00-
-
1964-67 A-body GM (Chevelle, El Camino) and BOP (GTO, LeMans, 442)TKX 5-speed kit
$4,555.95-
-
70-71 Camaro/Firebird Brake and Clutch Pedal Assembly
$149.00-
-
Complete 12-Bolt Rear Axle Assembly for 1968-72 Chevelle, GTO, El Camino and all GM A-body cars
Request A Quote-
-
Complete 12-Bolt Rear Axle Assembly for 1967-69 Camaro, Firebird and Trans-Am
Request A Quote-
